cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
320
Views
3
Helpful
7
Replies

EEM- putty pasting issue

jdub123
Beginner
Beginner

Using Putty or SecureCRT, I get an error when trying to paste in the following:

event manager applet bgp-neighbor-up
description Enable Loopback If BGP Drops
event syslog pattern "BGP-5-ADJCHANGE: neighbor.*Up" maxrun 1800
action 1.0 syslog msg “enable loopback interface”
action 1.5 cli command “enable”

Output:
r1(config)#event manager applet bgp-neighbor-up
r1(config-applet)#description Enable Loopback If BGP Drops
r1(config-applet)#$g pattern "BGP-5-ADJCHANGE: neighbor.*Up" maxrun 1800
r1(config-applet)#action 1.0 syslog msg b^@
r1(config-applet)#enable loopback interfaceb^@ ^
% Invalid input detected at '^' marker.

It works fine when manually typing in the config. Is it looking for an escape character or similar? Thanks!

7 Replies 7

event syslog pattern <<- use this 

jdub123
Beginner
Beginner

Thank you. The syslog pattern line takes just fine. It appears to be erroring on the " of action 1.0 syslog msg “enable loopback interface”

I see it and check what you meaning by enable Loopback interface ? can you more elaborate.

jdub123
Beginner
Beginner

It's just a generic syslog message for my lab. It also errors at " when removing the syslog msg:


event manager applet bgp-neighbor-up
description Enable Loopback If BGP Drops
event syslog pattern "BGP-5-ADJCHANGE: neighbor.*Up" maxrun 1800
action 1.5 cli command “enable”

r1(config)#event manager applet bgp-neighbor-up
r1(config-applet)#description Enable Loopback If BGP Drops
r1(config-applet)#$g pattern "BGP-5-ADJCHANGE: neighbor.*Up" maxrun 1800
r1(config-applet)#action 1.5 cli command b^@
r1(config-applet)#enableb^@ ^
% Invalid input detected at '^' marker.

this lab for you 
check how I config BGP-6 to add loopback when BGP peer is UP
NOTE:- I miss add IP in command ip add 1.1.1.1 255.255.255.255

NOTE:- when you paste you need to remove the hostname in command  

Screenshot (1072).png

jdub123
Beginner
Beginner

I figured it out. It's a weird formatting issue. Thank you for the help.

jdub123_0-1697559829333.png

 

OMG
the issue with comma 
glad issue is solved 

MHM

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: