I am trying to configure ADSL on 2911 with EHWIC VA-DSL-A card. PPPoE configuration is working fine but when i try to configure the ATM interface with static ip address i cant even ping my interface. I guess i am missing something. I am using pvc 0/35 for static and pvc 8/81 for pppoe. pppoe is working fine
Hardware: CISCO 2911/K9
Cisco IOS Software: C2900 Software (C2900-UNIVERSALK9-M), Version 15.3(2)T
controller VDSL 0/1/0
no ip address
no atm ilmi-keepalive
interface ATM0/1/0.1 point-to-point
ip address 172.18.1.105 255.255.255.252
protocol ip 172.18.1.105 broadcast
protocol ip 172.18.1.106 broadcast
interface ATM0/1/0.2 point-to-point
pppoe-client dial-pool-number 1
no ip address
ip address negotiated
ip mtu 1452
ip nat outside
ip virtual-reassembly in
dialer pool 1
ppp authentication chap pap callin
ppp chap hostname adsl123456
ppp chap password 0 adsl123456
ppp pap sent-username adsl123456 password 0 adsl123456
Listen: https://smarturl.it/CCRS9E25 Follow us: twitter.com/ciscochampions
With applications and users everywhere, the networks are now, more than ever, being tasked with delivering consistent protection while providing an exceptional user exper...
Listen: https://smarturl.it/CCRS9E24 Follow us: https://twitter.com/CiscoChampion
Cisco Radio Aware Routing addresses several of the challenges faced when merging IP routing and radio communications in mobile networks, especially those exhibiti...
Listen: https://smarturl.it/CCRS9E23 Follow us: https://twitter.com/CiscoChampion The Wi-Fi 6E Catalyst 9136 access point takes advantage of the 6-GHz band to produce a network that is more reliable and secure, with higher throughput, more ...
When moving from OSPFv2 to OSPFv3, there are many changes in the format of the LSAs Type, but the most known changes are: IP prefix informations are no longer carried in Type-1 LSA and Type-2 LSA, new LSAs Type 8 and 9 are added to carry these prefixes.