06-18-2013 02:31 AM - edited 03-04-2019 08:14 PM
HI All,
I am getting the below error in my core devices. i wanted to know what exactly the value 520 mean in the below syslog
.Jun 16 16:12:20.419: %DUAL-5-NBRCHANGE: EIGRP-IPv4:(520) 10: Neighbor X.X.X.X (Vlan50) is down: holding time expired
.Jun 16 16:12:20.447: %DUAL-5-NBRCHANGE: EIGRP-IPv4:(520) 10: Neighbor X.X.X.X (Vlan50) is down: holding time expired
.Jun 16 16:12:20.587: %DUAL-5-NBRCHANGE: EIGRP-IPv4:(520) 10: Neighbor X.X.X.X (Vlan50) is up: new adjacency
.Jun 16 16:12:20.587: %DUAL-5-NBRCHANGE: EIGRP-IPv4:(520) 10: Neighbor X.X.X.X (Vlan50) is up: new adjacency
.Jun 16 16:12:20.795: %DUAL-5-NBRCHANGE: EIGRP-IPv4:(520) 10: Neighbor X.X.X.X (Port-channel1) is down: Interface PEER-TERMINATION received
.Jun 16 16:12:20.847: %DUAL-5-NBRCHANGE: EIGRP-IPv4:(520) 10: Neighbor X.X.X.X (Port-channel1) is up: new adjacency
.Jun 16 16:16:14.584: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/37, changed state to down
regards,
Vijay bhargav.R
06-18-2013 03:02 AM
Hi,
I think this is the AS number but I'm not 100% sure.
Regards
Alain
Don't forget to rate helpful posts.
06-18-2013 03:03 AM
HI Alain,
AS number is 10, which is displayed on the log as well
regards,
VB
06-18-2013 03:38 AM
Hi,
yep you're correct, some new pair of glasses couldn't hurt for me
Regards
Alain
Don't forget to rate helpful posts.
06-18-2013 09:31 AM
Hello Vijay,
The "(520)" is the EIGRP DUAL Topology Database Table ID. It comes from a C struct called ddbtype_ that contains a member called ddb_name with a type of char and a length set by a #define that's currently 32. (for IPv4)
A comment on the ddb_name field definition in the struct says: "Name of protocol specific user of ddb".
A "ddb" is a DUAL Descriptor Block. It could be affected by the PDM (Protocol Dependent Module).
The structure of this message is:
LOG: EIGRP-ddb_name:(tableid) as_id: Neighbor address (interface)
In the case of %DUAL-5-NBRCHANGE: EIGRP-IPv4:(520) 10: Neighbor X.X.X.X (Port-channel1)
ddb_name- IPv4
tableid- internal ID for the RIB (520)
as_id- autonomous system ID (10)
address- IP address of the neighbor (X.X.X.X)
interface- Name of the interface (Port-channel-1)
This information comes from a personal research.
Regards.
Please don't forget to rate helpful posts.
06-18-2013 09:46 AM
Hi,
I believe you deserve +5 for these great infos.
Regards
Alain
Don't forget to rate helpful posts.
06-18-2013 10:15 AM
Hello Cadet,
Thanks for your rating.
Regards.
Please don't forget to rate helpful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide