cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
118
Views
0
Helpful
4
Replies
Highlighted
Enthusiast

EIGRP network unreachable

Dear All,

With the attached network diagram, what will be the basic EIGRP configuration to communicate within the two location with unequal cost load balancing.

I have configured but not able to communicate within the inside networks. However from Office 1 router the inside network is completely not accessible but from the Office 2 router only the 172.30.31.0/24 network is accessible.

Both side  ISR 4331 with IOS ver 15.5.

Can anyone please help me.

Regards

Goutam

Everyone's tags (1)
4 REPLIES 4
VIP Mentor

Hello,

Hello,

try and turn off auto-summary in your EIGRP on both routers...

Enthusiast

I have done all this pos and

I have done all this pos and cos. Not happening. 

VIP Mentor

Hello,

Hello,

there is a static default route in the configuration of your Office 1 router, try and disable it.


ip route 0.0.0.0 0.0.0.0 172.30.30.1 name @@@Inside_Network@@@

In addition, when you do a 'show ip eigrp neighbors' on both routers, do the respective routers show up ?

Enthusiast

Hi, I cant disable the

Hi, I cant disable the default route because some of the VSAT networks are connected with the Office-1 router. However I have modified some configuration and EIGRP working, but need to tune the configuration.

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards