10-27-2016 03:50 AM - edited 03-05-2019 07:21 AM
Dear All,
With the attached network diagram, what will be the basic EIGRP configuration to communicate within the two location with unequal cost load balancing.
I have configured but not able to communicate within the inside networks. However from Office 1 router the inside network is completely not accessible but from the Office 2 router only the 172.30.31.0/24 network is accessible.
Both side ISR 4331 with IOS ver 15.5.
Can anyone please help me.
Regards
Goutam
10-27-2016 05:40 AM
Hello,
try and turn off auto-summary in your EIGRP on both routers...
10-27-2016 05:47 AM
I have done all this pos and cos. Not happening.
10-27-2016 07:44 AM
Hello,
there is a static default route in the configuration of your Office 1 router, try and disable it.
ip route 0.0.0.0 0.0.0.0 172.30.30.1 name @@@Inside_Network@@@
In addition, when you do a 'show ip eigrp neighbors' on both routers, do the respective routers show up ?
10-31-2016 12:03 AM
Hi, I cant disable the default route because some of the VSAT networks are connected with the Office-1 router. However I have modified some configuration and EIGRP working, but need to tune the configuration.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: