cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
516
Views
0
Helpful
1
Replies
Highlighted
Beginner

Enabling IPsec Tunnel on Cisco ASR 1000 router

Hi there.

We have 2 ASR 1001-HX routers. I've tested 3 different versions of IOSxe in order to enable securityk9 Right-to-Use license, but there was no result.

Currently active boot system image :

asr1000-universalk9.16.06.04.SPA.bin

 

previous images I've tested :

asr1000-universalk9.16.06.03.SPA.bin
asr1000-universalk9_noli.16.05.01b.SPA.bin

 

some benefit show command results and information you may want to know

!
Router#sho ver | in absent
Crypto Hardware Module absent
!

----------------------------------------------------

Feature name             Enforcement  Evaluation  Subscription   Enabled  RightToUse 

securityk9                  yes                 yes           no                   no          yes 

ipsec                         yes                 yes           no                   no          yes

!

These commands have been executed
license accept end user agreement
license solution level securityk9
!
license right-to-use move securityk9
license right-to-use move ipsec
!

!

!
Router#sho license right-to-use
Index 19 Feature: ipsec
              Period left: Life time
              License Type: RightToUse
              License State: Active, Not in Use, EULA accepted
              License Count: Non-Counted
              License Priority: Low
Index 33 Feature: interface_10g
             Period left: Life time
             License Type: RightToUse
             License State: Active, In Use
             License Count: 1/0 (In-use/Violation)
             License Priority: Low
Index 36 Feature: securityk9
              Period left: Life time
              License Type: RightToUse
              License State: Active, Not in Use, EULA accepted
              License Count: Non-Counted
              License Priority: Low

Router#

I will be so appreciated if anybody can help me.

1 REPLY 1
VIP Mentor

Re: Enabling IPsec Tunnel on Cisco ASR 1000 router

Hello,

 

sounds like you are using the right commands. The fastest way to resolve this is probably to contact the Global Licensing Team:

 

https://slexui.cloudapps.cisco.com/SWIFT/LicensingUI/html/contact.html

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards