I'm having an issue getting MPLS to work from a ME6524 to a 7304.
The following is my configuration.
ME6524
-------
interface vlan 84
mtu 1534
xconnect 10.1.1.1 111 encapsulation mpls
7304
-----
Gigabit0/1
mtu 1534
Gigabit0/1.111
encapsulation dot1q 84
xconnect 10.2.2.2 111 encapsulation mpls
Outputs from 'show mpls l2transport vc' & 'show mpls l2transport vc detail' seem fine. Both sides are UP/UP. I see labels in the forwarding table.
The only weird thing...is on switch sitting off the 7304 I don't see any mac-addresses coming from the EoMPLS connection. But when I check the mac-addresses on the ME6524 I can see the mac-addresses of the devices connected to the 7304. Just not the other way around.
Could this be a code issue?