cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
648
Views
0
Helpful
1
Replies

Error Log - %EARL_L3_ASIC-DFC4-3-INTR_FATAL: EARL L3 ASIC 0: fatal interrupt NF_SE_CMD_ERR

m.maier
Level 1
Level 1

I've the following problem on a WS-C6506-E with an IOS s2t54-advipservicesk9-mz.SPA.151-2.SY3.bin. And have found no error description into CCO, therefore my post.

 

Feb 23 14:20:43.275 MET: %EARL_L3_ASIC-DFC4-3-INTR_FATAL: EARL L3 ASIC 0: fatal interrupt NF_SE_CMD_ERR

 

Any idea?

Thnaks for help.

1 Reply 1

Richard Burts
Hall of Fame
Hall of Fame

Is this a new switch or one that has been in service for a while? Pretty clearly there is something impacting ASIC. You might find some helpful information if you put this output through the output interpreter on the Cisco site. But the best thing to do would be to open a case with Cisco TAC.

 

HTH

 

Rick

HTH

Rick
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: