04-07-2021 05:58 AM - edited 04-07-2021 06:11 AM
I getting the following error when attempting to copy image to flash, it should be mentioned I use two different Tftp Server applications but the result the same
Bog#copy tftp flash:
Address or name of remote host [192.168.42.210]?
Source filename [c890-universalk9-mz.158-3.M6.bin]?
Destination filename [c890-universalk9-mz.158-3.M6.bin]?
Accessing tftp://192.168.42.210/c890-universalk9-mz.158-3.M6.bin...
%Warning: File not a valid executable for this system
Abort Copy? [confirm]
I have included additional information about the router for your guidance
Bog#sh ver
Cisco IOS Software, C800 Software (C800-UNIVERSALK9-M), Version 15.3(3)M5, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Wed 04-Feb-15 11:24 by prod_rel_team
ROM: System Bootstrap, Version 15.2(3r)XC, RELEASE SOFTWARE (fc1)
Bog uptime is 1 week, 6 days, 3 hours, 56 minutes
System returned to ROM by power-on
System image file is "flash:/c800-universalk9-mz.SPA.153-3.M5.bin"
Last reload type: Normal Reload
Last reload reason: power-on
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco C892FSP-K9 (revision 1.0) with 488524K/35763K bytes of memory.
Processor board ID FTX19138015
10 Gigabit Ethernet interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 32 bits wide
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 C892FSP-K9 FTX19138015
License Information for 'c800'
License Level: advipservices Type: Permanent
Next reboot license Level: advipservices
Configuration register is 0x2102
Thanks
Regards
Solved! Go to Solution.
04-07-2021 09:45 AM
- As a sanity check ,try another release, preferably one of the suggested releases, check if the problem persists or not.
M.
04-07-2021 06:21 AM
- Make sure the correct image is being downloaded (double check on the router model)
M.
04-07-2021 07:18 AM
Hello Marce,
I confirm the router mode is C892FSP-K9.
Regards
04-07-2021 09:45 AM
- As a sanity check ,try another release, preferably one of the suggested releases, check if the problem persists or not.
M.
04-07-2021 11:04 AM
Hello Marce,
I found the error the model router C892FSP-K9 has it own ios c800-universalk9-mz.SPA.158-3.M6.bin.
Thanks
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide