cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
6822
Views
0
Helpful
1
Replies

Ethernet Switch Module transmit queue is full

drlecter2007
Level 1
Level 1

Please help!

1 Reply 1

nkarpysh
Cisco Employee
Cisco Employee

Hey,

The error message is indicating buffer overflow on the interfaces, which

is probably accompanied by the large amount of overruns on the interfaces. This

shows the number of times that the receiver hardware was incapable of

handing received data to a hardware buffer because the input rate exceeded the receiver's capability to handle the data.

This in turn caused the traffic to be SW switched and led to CPUHOG which triggered the crash.

SO there is too much traffic coming to this switch. I would suggest to offload some traffic to another interface from the one which get most of input errors/overruns if possible.

Hope this helps,

Nik

HTH,
Niko