cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
888
Views
5
Helpful
3
Replies

EVPN host routes advertised to external network

edbucher
Level 1
Level 1

I have a simple EVPN based campus LAN (IOS XE 17.6.3) that connects L3 to a legacy network (BGP<>EIGRP redistribution) for migration purposes. I've noticed /32 host routes are being advertised to the legacy network derived from the /24 EVPN VLAN. I understand the BGP route-type 2 routes and the purpose within the EVPN network. I don't understand why both /24 route and /32 host routes would be advertised into the legacy EIGRP network? Is this necessary or what do I need to do to resolve these /32 routes from being advertised?

Thanks in advance for your time!

 

1 Accepted Solution

Accepted Solutions

Harold Ritter
Spotlight
Spotlight

Hi @edbucher ,

It depends what your bgp to eigrp redistribution looks like. Filtering these routes should be pretty straightforward.

Regards, 

Regards,
Harold Ritter, CCIE #4168 (EI, SP)

View solution in original post

3 Replies 3

Harold Ritter
Spotlight
Spotlight

Hi @edbucher ,

It depends what your bgp to eigrp redistribution looks like. Filtering these routes should be pretty straightforward.

Regards, 

Regards,
Harold Ritter, CCIE #4168 (EI, SP)

Currently no filters just straight redistribution. So seeing host routes is normal in this scenario? I will filter them out I just wanted to make sure.

Hi @edbucher ,

Yes, seeing the host routes is normal and expected.

Regards,

Regards,
Harold Ritter, CCIE #4168 (EI, SP)