Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
627
Views
0
Helpful
2
Replies

Filter EIGRP updates?

Gregory Welch
Level 1
Level 1

‎02-13-2013 07:28 AM - last edited on ‎03-25-2019 03:38 PM by Community Manager

        I have three routers connected to a private circuit and routing via EIGRP.  The routers are physically located in California, California, and Minnesota.  The problem is, when I do a show ip route, I get:   

D EX    10.246.174.0/24

           [170/26456320] via 172.16.1.252, 08:18:48, GigabitEthernet1/0/1

           [170/26456320] via 172.16.1.250, 08:18:48, GigabitEthernet1/0/1

           [170/26456320] via 172.16.1.248, 08:18:48, GigabitEthernet1/0/1

Right now traffic is load balancing between the routers instead of using the closest router.  How do I filter EIGRP updates to prefer a particular route?

Labels:
0 Helpful
2 Replies 2

patrick.preuss
Level 1
Level 1

‎02-13-2013 07:47 AM

Hi Gregory

i asume that you have a full meshed network.

Normaly you will do this with the metric and not via a fillter because you might what to have backup.

If you what to fillter you might what to have a look a the distribute list.

https://www.cisco.com/en/US/docs/ios/12_2/iproute/command/reference/1rfeigrp.html#wp1030091

HTH Patrick

0 Helpful

mahmoodmkl
Level 7
Level 7

‎02-13-2013 10:22 AM

Hi
i suggest u can use offset lists

Sent from Cisco Technical Support iPhone App

0 Helpful
Customers Also Viewed These Support Documents