Frame Relay set up

[alliasneo1]

Hey guys, just wondering if someone could clarify something about Frame Relay for me? I have attached a video which will hopefully explain things.

thanks

Daryl

http://www.youtube.com/watch?v=PPPgcMIfjwY

[Marwan ALshawi]

this is very basic Frame-rlay topology ( FR is like a big L2 transport technology uses p2p links in the SP FR switch to tranasprot customers traffic over thses logical links )

have read using the following links to understand it a bit more about it

http://www.cisco.com/en/US/netsol/ns813/networking_solutions_solution_segment_home.html

http://www.cisco.com/en/US/tech/tk713/tk237/technologies_tech_note09186a008014f8a7.shtml

http://www.myhome.org/pg/frame.htm

http://www.cisco.com/en/US/tech/tk713/tk237/technologies_q_and_a_item09186a008009457a.shtml

HTH

if helpful Rate

[Jon Marshall]

Daryl

Had a quick look at the video and yes it seems to be correct. Basically when we talk about a frame-relay switch we are really just talking about a router that has a lot of serial interfaces. So you simply connect each router on the edge to the frame-relay router and then configure the frame-relay setup.

So i think you should be fine with what you have setup. Have a look at this link also which shows how to configure the actual frame-relay router itself -

http://www.thebryantadvantage.com/Frame%20Relay%20Switch.htm

Have fun

Jon

[alliasneo1]

Thanks very much for the speedy responses. I'll have a look through the links and see what I can do.

thanks again