cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

803
Views
0
Helpful
1
Replies
Highlighted
Beginner

ftp and http Access control list

ip access-list extended vlan10

permit tcp 172.20.10.0 0.0.0.255 host 172.20.10.2 eq ftp

permit tcp 172.20.10.0 0.0.0.255 host 172.20.20.2 eq ftp

permit tcp 172.20.10.0 0.0.0.255 any eq www

ip access-list extended vlan20

permit tcp 172.20.20.0 0.0.0.255 host 172.20.20.2 eq ftp

permit tcp 172.20.20.0 0.0.0.255 any eq www

ip access-list extended vlan30

permit tcp 172.20.30.0 0.0.0.255 any

This is how I have my access list set up to allow FTP to each vlan/departments server's and the internet, but it doesn't seem to work in packet tracer.  I'm a student working on my case study and i guess I just don't have a good grasp on ACL's yet.  Vlan 10 is personal and needs to have ftp access to the internet, its server and accounts server, vlan 20 is accounts and just needs access to its own server, and vlan 30 is the it department and needs full access accross all networks, any help would be greatly appreciated.

Everyone's tags (6)
1 REPLY 1
Beginner

ftp and http Access control list

A little more information.  Each ACL is applied to the corresponding vlans subinterface in.  It seems to me that only the first rule in the list is working.

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here