GLBP for a IP Sec VPN environment

[m1xed0s]

Hey,

The titie might confuse and let me explain here.

I have 2 routers connect to 2 different ISPs for BGP. I have HSRP configured on both to form a failover redundant pair. However basing on Solarwinds, one of the 2 ISP link is loaded at the moment. So I start thinking about configuring GLBP to replace HSRP to utilize both ISPs at the same time.

However something holding me is the IP Sec VPN Tunnels. I have ASA 5510 behind the 2 routers as VPN termination point. So will GLBP (load balancing with Host Dependent OR round robin) work with IP Sec VPN Tunnels? If so, I wont benifit from Round Robin loadbalancing, right?

Thanks,

/S

[m1xed0s]

No one? Still waiting for suggestion.

[evergreenajay]

I recomanded that you shuld configure the IBGP and use the bgp attribute for load balance...:)

[m1xed0s]

I have the iBGP configured between 2 Routers but just not sure how I would configure BGP attributes to do load balancing. Thats why I start thinking of GLBP.

[m1xed0s]

Still hope someone can share some light on this...