cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1474
Views
0
Helpful
1
Replies

%HA-REDCON-1-STANDBY_NOT_READY standby card is NOT ready

hello, i have an a9k Router with two RSP440-SE , I have to get many message errors on the logs file ": This card is standby and its backup process groups are NOT ready "

 

 

RP/0/RSP0/CPU0:A9K#show platform 
Sun Jun 19 21:30:05.308 UTC
Node            Type                      State            Config State
-----------------------------------------------------------------------------
0/RSP0/CPU0     A9K-RSP440-SE(Active)     IOS XR RUN       PWR,NSHUT,MON
0/RSP1/CPU0     A9K-RSP440-SE(Standby)    IOS XR RUN       PWR,NSHUT,MON
0/3/CPU0        A9K-36x10GE-TR            IOS XR RUN       PWR,NSHUT,MON
RP/0/RSP0/CPU0:A9K#sh hw-module fpd location 0/RSP0/CPU0
Sun Jun 19 21:30:56.980 UTC

===================================== ==========================================
                                      Existing Field Programmable Devices
                                      ==========================================
                                        HW                       Current SW Upg/
Location     Card Type                Version Type Subtype Inst   Version   Dng?
============ ======================== ======= ==== ======= ==== =========== ====
0/RSP0/CPU0  A9K-RSP440-SE              1.0   lc   cbc     0      16.115    Yes
                                              lc   fpga3   0       4.09     No 
                                              lc   fpga2   0       1.06     Yes
                                              lc   fpga1   0       0.09     Yes
                                              lc   rommon  0       0.70     Yes
--------------------------------------------------------------------------------
NOTES:
1.  One or more FPD needs an upgrade.  This can be accomplished
    using the "admin> upgrade hw-module fpd <fpd> location <loc>" CLI.
RP/0/RSP0/CPU0:BNG-A9K-FTT#sh hw-module fpd location 0/RSP1/CPU0
Sun Jun 19 21:30:59.845 UTC

===================================== ==========================================
                                      Existing Field Programmable Devices
                                      ==========================================
                                        HW                       Current SW Upg/
Location     Card Type                Version Type Subtype Inst   Version   Dng?
============ ======================== ======= ==== ======= ==== =========== ====
0/RSP1/CPU0  A9K-RSP440-SE              1.0   lc   cbc     0      16.117    No 
                                              lc   fpga3   0       4.09     No 
                                              lc   fpga1   0       0.11     No 
                                              lc   fpga2   0       1.10     No 
                                              lc   rommon  0       0.76     No 

 

 

RP/0/RSP1/CPU0:Jun 19 21:25:28.417 UTC: cfgmgr-rp[165]: %MGBL-CONFIG-6-OIR_RESTORE : Configuration for node '0/RSP1/0' has been restored. 
RP/0/RSP0/CPU0:Jun 19 21:25:31.076 UTC: rmf_svr[409]: %HA-REDCON-1-STANDBY_NOT_READY : standby card is NOT ready 
RP/0/RSP1/CPU0:Jun 19 21:25:31.069 UTC: rmf_svr[409]: %HA-REDCON-1-STANDBY_NOT_READY : standby card is NOT ready 
RP/0/RSP0/CPU0:Jun 19 21:25:31.328 UTC: rmf_svr[409]: %HA-REDCON-1-BACKUP_NOT_READY : backup process groups between 0/RSP0/CPU0 and 0/RSP1/CPU0 are NOT ready 
RP/0/RSP1/CPU0:Jun 19 21:25:31.321 UTC: rmf_svr[409]: %HA-REDCON-6-STBY_BACKUP_NOT_READY : This card is standby and its backup process groups are NOT ready 
RP/0/RSP0/CPU0:Jun 19 21:25:31.331 UTC: rmf_svr[409]: %HA-REDCON-1-BACKUP_READY : backup process groups between 0/RSP0/CPU0 and 0/RSP1/CPU0 are ready 
RP/0/RSP1/CPU0:Jun 19 21:25:31.324 UTC: rmf_svr[409]: %HA-REDCON-6-STBY_BACKUP_READY : This card is standby and its backup process groups are ready 
RP/0/RSP0/CPU0:Jun 19 21:25:31.382 UTC: rmf_svr[409]: %HA-REDCON-1-BACKUP_NOT_READY : backup process groups between 0/RSP0/CPU0 and 0/RSP1/CPU0 are NOT ready 
RP/0/RSP1/CPU0:Jun 19 21:25:31.376 UTC: rmf_svr[409]: %HA-REDCON-6-STBY_BACKUP_NOT_READY : This card is standby and its backup process groups are NOT ready 
RP/0/RSP0/CPU0:Jun 19 21:25:31.385 UTC: rmf_svr[409]: %HA-REDCON-1-BACKUP_READY : backup process groups between 0/RSP0/CPU0 and 0/RSP1/CPU0 are ready 
RP/0/RSP1/CPU0:Jun 19 21:25:31.379 UTC: rmf_svr[409]: %HA-REDCON-6-STBY_BACKUP_READY : This card is standby and its backup process groups are ready 
RP/0/RSP0/CPU0:Jun 19 21:25:31.532 UTC: rmf_svr[409]: %HA-REDCON-1-BACKUP_NOT_READY : backup process groups between 0/RSP0/CPU0 and 0/RSP1/CPU0 are NOT ready 
RP/0/RSP1/CPU0:Jun 19 21:25:31.526 UTC: rmf_svr[409]: %HA-REDCON-6-STBY_BACKUP_NOT_READY : This card is standby and its backup process groups are NOT ready 
RP/0/RSP0/CPU0:Jun 19 21:25:31.535 UTC: rmf_svr[409]: %HA-REDCON-1-BACKUP_READY : backup process groups between 0/RSP0/CPU0 and 0/RSP1/CPU0 are ready 
RP/0/RSP1/CPU0:Jun 19 21:25:31.529 UTC: rmf_svr[409]: %HA-REDCON-6-STBY_BACKUP_READY : This card is standby and its backup process groups are ready 
RP/0/RSP0/CPU0:Jun 19 21:25:36.302 UTC: rmf_svr[409]: %HA-REDCON-1-BACKUP_NOT_READY : backup process groups between 0/RSP0/CPU0 and 0/RSP1/CPU0 are NOT ready 
RP/0/RSP1/CPU0:Jun 19 21:25:36.295 UTC: rmf_svr[409]: %HA-REDCON-6-STBY_BACKUP_NOT_READY : This card is standby and its backup process groups are NOT ready 
RP/0/RSP0/CPU0:Jun 19 21:25:36.305 UTC: rmf_svr[409]: %HA-REDCON-1-BACKUP_READY : backup process groups between 0/RSP0/CPU0 and 0/RSP1/CPU0 are ready 
RP/0/RSP1/CPU0:Jun 19 21:25:36.298 UTC: rmf_svr[409]: %HA-REDCON-6-STBY_BACKUP_READY : This card is standby and its backup process groups are ready 
RP/0/RSP0/CPU0:Jun 19 21:25:41.077 UTC: rmf_svr[409]: %HA-REDCON-1-STANDBY_NOT_READY : standby card is NOT ready 

 

1 Accepted Solution

Accepted Solutions
1 Reply 1

Review Cisco Networking for a $25 gift card