Thanks for your reply.This command is working.
It is showing following output, as I am fresher
I am not able to conclude this output.
I am confuse!! It's good if you can explaine me.!
Power Supply 1 is Zytek AC Power Supply. Unit is on.
Power Supply 2 is Zytek AC Power Supply. Unit is on.
NPE Inlet measured at 28C/82F
NPE Outlet measured at 32C/89F
+3.45 V measured at +3.47 V
+5.15 V measured at +5.23 V
+12.15 V measured at +12.29 V
-11.95 V measured at -11.85 V
Thanks a lot.
Basically, it's telling you that everything is okay:
- both power supplies are operational
- the temperature readings are quite normal
- the voltage readings are very close to what they should be.