Health of 7200 router?

[kunalgandhi]

Hi

How can I check the health of 7200 router

i.e temperature,power supply status etc.

*I have min access on router......

[pkhatri]

Hi,

'show environment all' should do it. You can do it from the user EXEC mode.

Paresh

PS. Pls do rate posts.

[kunalgandhi]

Hi Paresh,

Thanks for your reply.This command is working.

It is showing following output, as I am fresher

I am not able to conclude this output.

I am confuse!! It's good if you can explaine me.!

Power Supplies:

Power Supply 1 is Zytek AC Power Supply. Unit is on.

Power Supply 2 is Zytek AC Power Supply. Unit is on.

Temperature readings:

NPE Inlet measured at 28C/82F

NPE Outlet measured at 32C/89F

Voltage readings:

+3.45 V measured at +3.47 V

+5.15 V measured at +5.23 V

+12.15 V measured at +12.29 V

-11.95 V measured at -11.85 V

Thanks a lot.

Kunal

[pkhatri]

Kunal,

Basically, it's telling you that everything is okay:

- both power supplies are operational

- the temperature readings are quite normal

- the voltage readings are very close to what they should be.

Paresh

[kunalgandhi]

Thanks Paresh

Now its clear.

Thanks

Kunal