cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
395
Views
0
Helpful
3
Replies
gavin.mckee
Beginner

HELP: SUP32 and WS-X6182-2PA

HI,

My switch keeps telling me that the software image for WS-X6182-2PA is not bundled in the image.

What does this mean and what can I do about it?

3 REPLIES 3
ciscocow
Beginner

What are you running for the IOS on the switch?

Below is the minimum required IOS for the 65xx/76xx

Minimum Software Release

Cisco IOS® Software Release 12.1(8)E

I have just installed:

s3223-adventerprisek9_wan-mz.122-33.SXH2a.bin

its still telling me that there are issues. the card is staying powered down

Supervisor Engine 32 Restrictions

•Supervisor Engine 32 requires a high-capacity fan tray (see the "Fan Trays" section).

•In some chassis, Supervisor Engine 32 requires a high-capacity power supply (see the "Power Supplies" section).

•Supervisor Engine 32 does not support this hardware:

-WS-F6K-PFC3A Policy Feature Card 3A (PFC3A)

-WS-F6K-PFC3BXL Policy Feature Card 3BXL (PFC3BXL)

-DFCs (installed DFCs do not power up with a Supervisor Engine 32)

-Switch Fabric Modules

-These switching modules:

-WS-X6704-10GE 4-port 10-Gigabit Ethernet XENPAK

-WS-X6748-SFP 48-port Gigabit Ethernet SFP

-WS-X6724-SFP 24-port Gigabit Ethernet SFP

-WS-X6816-GBIC 16-port Gigabit Ethernet GBIC

-WS-X6748-GE-TX 48-port 10/100/1000 RJ-45

-7600-SIP-600 SPA Interface Processor-600

-Optical Services Modules (OSMs)

-WS-X6182-2PA FlexWAN Module (the WS-X6582-2PA Enhanced FlexWAN Module is supported)

-CISCO7603 3-slot chassis

That is from this link

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/release/notes/OL_4164.html#wp2565567

So sorry i guess it is not supported.