11-03-2020 01:48 AM
Dears,
please help me to configure this settings on Cisco Router 881 Model:
Port: G 0 /9 access
username: guxvst@2m.bb.net.sa
password: 569277
DNS 1: 87.101.xxx.x
DNS 2: 87.101.xxx.x
please need your help
11-25-2020 10:25 AM
Hello,
no. FastEthernet4 is the WAN port. Did you try a different cable ?
11-25-2020 10:56 PM
Hello,
the same cable work on port 3 success
11-25-2020 11:53 PM
Hello,
I suspect that the power injector has something to do with this.
Check if your router has an inline power module installed (if that is the case, the interface command 'power inline' should be available.
Also, toggle CDP and LLDP on the router:
Router#conf t
Router(config)#cdp run
Router#conf t
Router(config)#no cdp run
Router#conf t
Router(config)#interface FastEthernet4
Router(config-if)#lldp receive
Router(config-if)#lldp transmit
Router#conf t
Router(config)#interface FastEthernet4
Router(config-if)#no lldp receive
Router(config-if)#no lldp transmit
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: