08-10-2011 12:46 PM - edited 03-04-2019 01:14 PM
Hello Team,
Has any one had experience with RedBack SmartEdge router and how do you configure NAT/PAT on it. I am having problem getting Nat/Pat work. My Cisco router NAT/PAT config is working great except RedBack and do not have much experience with RedBack. Please help with
08-10-2011 12:49 PM
Please help with step-by-step NAT configuration and how to apply the policy.
Thanks,
Eric
08-10-2011 02:05 PM
Eric
Enter this into Google -
"redback ip services and security configuration guide"
and then refer to the NAT chapter in the above guide.
Jon
08-10-2011 06:00 PM
Thank you Jon for the lead.
Eric
08-11-2011 07:09 AM
I tried this config on RedBack router and did not work any idea?
!Create the NAT pool
[local]Redback(config-ctx)#ip nat pool pool_dyn
[local]Redback(config-nat-pool)#address 11.11.11.0/24
[local]Redback(config-nat-pool)#exit
!Create the policy ACL
[local]Redback(config-ctx)#policy access-list NAT-ACL
[local]Redback(config-access-list)#seq 10 permit ip 10.10.10.0 0.0.0.255 class CLASS3
[local]Redback(config-access-list)#exit
Command Descriptions
ACL Configuration 8-13
!Create the NAT policy and apply the policy ACL
[local]Redback(config-ctx)#nat policy pol1
[local]Redback(config-nat-pool)#ignore
[local]Redback(config-nat-pool)#access-group NAT-ACL
[local]Redback(config-policy-acl)#class CLASS3
[local]Redback(config-policy-acl-class)#pool pool_dyn local
Thanks,
Eric
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide