cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
213
Views
0
Helpful
1
Replies
Highlighted
fly Beginner
Beginner

How can I reconfig card type on ASR 1006 of E1 card

ASR1006-02(config)#car
ASR1006-02(config)#card ty
ASR1006-02(config)#card type e1 0 0
ASR1006-02(config)#card type e1 0 1
ASR1006-02(config)#car
ASR1006-02(config)#no car
ASR1006-02(config)#no card t
ASR1006-02(config)#no card type e1 0 0
%'no card type' command is not supported on this card
ASR1006-02(config)#card ty
ASR1006-02(config)#card type t1 0 0
Card type has already been configured

 

 

 

NAME: "SPA subslot 0/0", DESCR: "8-port Channelized T1/E1 V2 to DS0 Shared Port Adapter"
PID: SPA-8XCHT1/E1-V2 , VID: V02 , SN: JAE223708U3

Everyone's tags (1)
1 REPLY 1
VIP Mentor

Re: How can I reconfig card type on ASR 1006 of E1 card

Hello,

 

make sure you have followed the guidelines as outlined in the attached document:

 

SPA-8XCHT1/E1, you must either:
Note
• Remove the SPA-8XCHT1/E1 from current slot
and reinsert the SPA to another slot. The slot in

which the SPA-8XCHT1/E1 is being reinserted
must not have previously been installed with a
SPA-8XCHT1/E1. This is because the CLI
configuration is stored for a slot or subslot and
not for a SPA.OR
• Reload the router without saving the
configuration.

 

https://www.cisco.com/c/en/us/td/docs/interfaces_modules/shared_port_adapters/configuration/ASR1000/asr1000-sip-spa-book/asr-spa-t1serial-config.pdf

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards