12-01-2012 11:26 AM - edited 03-04-2019 06:17 PM
Hello,
I'v got 2 3945 routers with SM-D-ES3-48-P and sm-2ge-sfp-cu. They are connected by gi2/1 and gi1/0. OSPF is up.
A link (2 vlans) connected to one fe port of SM-D-ES3-48-P. What do i need to do to see them (vlans) from both sites(3945s).
Thank you in advance
Solved! Go to Solution.
12-01-2012 07:25 PM
Hi,
If they established adjacency just add these subnets under ospf process:
router ospf 1
network 192.168.0.0 0.0.0.255
network 192.168.1.0 0.0.0.255
And to verify
sh ip ospf neighbor
sh ip route
On routers
Sent from Cisco Technical Support iPhone App
12-01-2012 07:25 PM
Hi,
If they established adjacency just add these subnets under ospf process:
router ospf 1
network 192.168.0.0 0.0.0.255
network 192.168.1.0 0.0.0.255
And to verify
sh ip ospf neighbor
sh ip route
On routers
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide