cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1330
Views
0
Helpful
2
Replies
Highlighted
Beginner

How to connect two office for two cisco 2911

Hello

We have two different location for two offices

Office 1    =

Office 2

they are connected by Micro-Wave , Radio , and we have two cisco 2911 routers so we like to connect this two offices

Office 1 Microwav-radio  ip address ==    155.155.155.1

Local Network  =====                              10.10.10.x

Office 2   Microwave-radio ip adddress ==  155.155.155.2

Local Network 1   =                                  192.168.1.0

Local Network 2  =                                    192.168.2.0

so please i can configure interfaces , but i have little bit confuse for the Routing and the access list , so how office 1 can access the two local networks office 2

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

How to connect two office for two cisco 2911

Office 1:

IP ROUTE 192.168.1.0 255.255.255.0 155.155.155.1

IP ROUTE 192.168.2.0 255.255.255.0 155.155.155.1

Office 2:

IP ROUTE 10.10.10.0 255.255.255.0 155.155.155.2

That should do it

View solution in original post

2 REPLIES 2
Highlighted
Beginner

How to connect two office for two cisco 2911

Office 1:

IP ROUTE 192.168.1.0 255.255.255.0 155.155.155.1

IP ROUTE 192.168.2.0 255.255.255.0 155.155.155.1

Office 2:

IP ROUTE 10.10.10.0 255.255.255.0 155.155.155.2

That should do it

View solution in original post

Highlighted
Beginner

How to connect two office for two cisco 2911

thanks jose this works for me