How to port forward a range of ports using an asa 5512x?

[ChristianSchmidtJosiassen]

Hi

How do i port forward a range of ports on my ASA Firewall?

Best Greetings Christian Josiassen

[marce1000 · Accepted solution]

        FYI : https://www.petenetlive.com/KB/Article/0001111

 M.

[balaji.bandi · Accepted solution]

Example as below :

object service My_Ports
service tcp source range 80 443 3389
object network Inside_Device
host 192.168.1.X
nat (inside,outside) source static Inside_Device interface service My_Ports My_Ports

if you are using ASDM you can below document :

https://www.cisco.com/c/en/us/support/docs/ip/network-address-translation-nat/118996-config-asa-00.html