cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
721
Views
15
Helpful
8
Replies

HSRP Group Limitation

Dears
I am facing the below problem when I create more than 16 HSRP group on the Subinterfaces
each subinterface has its HSRP Group when I passed 16 HSRP group the below Message appear

 

% Warning: Interface MAC address filter only supports 15 additional addresses   
% and 15 HSRP groups are already configured.  The HSRP MAC address may not be   
% added to the MAC address filter if the group becomes active.

Router Model : ISR4331
IOSXE: isr4300-universalk9.16.06.04.SPA.bin

Thanks

8 REPLIES 8
Highlighted
VIP Mentor

Re: HSRP Group Limitation

Hello,

 

you have reached the hardware capability of the interface. 

 

show standby capability

 

shows you the max amount of groups you can configure...

Highlighted

Re: HSRP Group Limitation

Hi Georg

Kindly note that i have other ISR4331 Routers but I didn't face this problem on them but their IOS version is 15.5
is this related to capability of the interface or Software Version ?
what i should do in this case ?

Thanks

 
Highlighted
VIP Advisor

Re: HSRP Group Limitation

as suggested post this output to see what is the limitation here :

 

show standby capability

 

BB
*** Rate All Helpful Responses ***
Highlighted
Beginner

Re: HSRP Group Limitation

So are there any solution to increase this number for gi0/0/0 ?

 

4431# show standby capability
ISR4431/K9 * indicates hardware may support HSRP
|
Interface Type H Potential Max Groups per subin
Gi0/0/0 27 ISR4431-X-4x1GE * 25 (0x7FF5EDD013A0, 0x7FF5EDD013A0)
Gi0/0/1 27 ISR4431-X-4x1GE * 25 (0x7FF5EDD013A0, 0x7FF5EDD013A0)
Gi0/0/2 27 ISR4431-X-4x1GE * 25 (0x7FF5EDD013A0, 0x7FF5EDD013A0)
Gi0/0/3 27 ISR4431-X-4x1GE * 25 (0x7FF5EDD013A0, 0x7FF5EDD013A0)
GigabitEthernet0 27 RP management port * 4096 (0x7FF5EA178A20, 0x7FF5EDBC89F0)
LIIN0 27 LIIN -
Vlan1 156 Ethernet SVI * 4096 (0x7FF5EA178A20, 0x7FF5F3FD4AF0)

Highlighted
Enthusiast

Re: HSRP Group Limitation

Can you share the output of 'show standby capability'
Highlighted
Beginner

Re: HSRP Group Limitation


R1# show standby capability
7206VXR * indicates hardware may support HSRP
|
Interface Type H Potential Max Groups per subin
FastEthernet0/0 18 DEC21140 * 4096 (0x62E4C55C, 0x62E4C7D4)
FastEthernet1/0 18 i82543 (Livengood) * 4096 (0x62F03238, 0x62F0347C)
FastEthernet1/1 18 i82543 (Livengood) * 4096 (0x62F03238, 0x62F0347C)
FastEthernet2/0 18 i82543 (Livengood) * 4096 (0x62F03238, 0x62F0347C)
FastEthernet2/1 18 i82543 (Livengood) * 4096 (0x62F03238, 0x62F0347C)
Tunnel0 0 Tunnel -
R1#

Please do not hesitate to click the STAR button if you are satisfied with my answer.
Highlighted
Beginner

Re: HSRP Group Limitation

Try upgrading the device, as its an ISR router that may help

Please do not hesitate to click the STAR button if you are satisfied with my answer.
Highlighted
VIP Mentor

Re: HSRP Group Limitation

Hello

How many hrsp groups do you have configured for each interface,  Seems a bit excessive?



kind regards
Paul

Please rate and mark posts accordingly if you have found any of the information provided useful.
It will hopefully assist others with similar issues in the future
CreatePlease to create content