cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3545
Views
15
Helpful
8
Replies

HSRP Group Limitation

Dears
I am facing the below problem when I create more than 16 HSRP group on the Subinterfaces
each subinterface has its HSRP Group when I passed 16 HSRP group the below Message appear

 

% Warning: Interface MAC address filter only supports 15 additional addresses   
% and 15 HSRP groups are already configured.  The HSRP MAC address may not be   
% added to the MAC address filter if the group becomes active.

Router Model : ISR4331
IOSXE: isr4300-universalk9.16.06.04.SPA.bin

Thanks

8 Replies 8

Hello,

 

you have reached the hardware capability of the interface. 

 

show standby capability

 

shows you the max amount of groups you can configure...

Hi Georg

Kindly note that i have other ISR4331 Routers but I didn't face this problem on them but their IOS version is 15.5
is this related to capability of the interface or Software Version ?
what i should do in this case ?

Thanks

 

as suggested post this output to see what is the limitation here :

 

show standby capability

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

So are there any solution to increase this number for gi0/0/0 ?

 

4431# show standby capability
ISR4431/K9 * indicates hardware may support HSRP
|
Interface Type H Potential Max Groups per subin
Gi0/0/0 27 ISR4431-X-4x1GE * 25 (0x7FF5EDD013A0, 0x7FF5EDD013A0)
Gi0/0/1 27 ISR4431-X-4x1GE * 25 (0x7FF5EDD013A0, 0x7FF5EDD013A0)
Gi0/0/2 27 ISR4431-X-4x1GE * 25 (0x7FF5EDD013A0, 0x7FF5EDD013A0)
Gi0/0/3 27 ISR4431-X-4x1GE * 25 (0x7FF5EDD013A0, 0x7FF5EDD013A0)
GigabitEthernet0 27 RP management port * 4096 (0x7FF5EA178A20, 0x7FF5EDBC89F0)
LIIN0 27 LIIN -
Vlan1 156 Ethernet SVI * 4096 (0x7FF5EA178A20, 0x7FF5F3FD4AF0)

Can you share the output of 'show standby capability'


R1# show standby capability
7206VXR * indicates hardware may support HSRP
|
Interface Type H Potential Max Groups per subin
FastEthernet0/0 18 DEC21140 * 4096 (0x62E4C55C, 0x62E4C7D4)
FastEthernet1/0 18 i82543 (Livengood) * 4096 (0x62F03238, 0x62F0347C)
FastEthernet1/1 18 i82543 (Livengood) * 4096 (0x62F03238, 0x62F0347C)
FastEthernet2/0 18 i82543 (Livengood) * 4096 (0x62F03238, 0x62F0347C)
FastEthernet2/1 18 i82543 (Livengood) * 4096 (0x62F03238, 0x62F0347C)
Tunnel0 0 Tunnel -
R1#

Please do not hesitate to click the STAR button if you are satisfied with my answer.

Try upgrading the device, as its an ISR router that may help

Please do not hesitate to click the STAR button if you are satisfied with my answer.

Hello

How many hrsp groups do you have configured for each interface,  Seems a bit excessive?


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: