Hey peeps, I'm trying to run HSRP over 2 nexus 5000 switches and I cant seem to get the hsrp switches to see eachother. Admitedly Im new to nexuses and they have theyere wierd quirks Ive found. The HSRP config is pretty straightforward but Im , hoping some other eyes see what Im missing....
Nexus 1
Vlan201 - Group 201 (HSRP-V1) (IPv4)
Local state is Active, priority 100 (Cfged 100), may preempt
Forwarding threshold(for vPC), lower: 1 upper: 100
Hellotime 3 sec, holdtime 10 sec
Next hello sent in 1.957000 sec(s)
Virtual IP address is 172.20.201.254 (Cfged)
Active router is local
Standby router is unknown
Authentication text "cisco"
Virtual mac address is 0000.0c07.acc9 (Default MAC)
2 state changes, last state change 00:01:43
IP redundancy name is hsrp-Vlan201-201 (default)
interface Vlan201
no shutdown
ip address 172.20.201.1/24
hsrp 201
preempt
ip 172.20.201.254
Nexus 2
Vlan201 - Group 201 (HSRP-V1) (IPv4)
Local state is Active, priority 110 (Cfged 110), may preempt
Forwarding threshold(for vPC), lower: 1 upper: 110
Hellotime 3 sec, holdtime 10 sec
Next hello sent in 0.027000 sec(s)
Virtual IP address is 172.20.201.254 (Cfged)
Active router is local
Standby router is unknown
Authentication text "cisco"
Virtual mac address is 0000.0c07.acc9 (Default MAC)
2 state changes, last state change 00:00:48
IP redundancy name is hsrp-Vlan201-201 (default)
interface Vlan201
no shutdown
ip address 172.20.201.2/24
hsrp 201
preempt
priority 110
ip 172.20.201.254
