10-04-2012 06:19 PM - edited 03-04-2019 05:45 PM
Hello:
I'd like to know whether I could use an HSRP virtual IP address configured as a next-hop in a PBR.
For example (please see attached drawing):
Router 1
interface ethernet 0 ip address 1.0.0.1 255.255.255.0 standby 1 ip 1.0.0.3 standby 1 preempt standby 1 priority 110Router 2
interface ethernet 0 ip address 1.0.0.2 255.0.0.0 standby 1 ip 1.0.0.3 standby 1 preempt
Router 3 (L3 switch):
interface ethernet 0 description TO_ROUTER_1
switchport mode access
switchport acces vlan 10interface VLAN 20 ip address 2.0.0.1 255.255.255.0interface ethernet 1 description TO_ROUTER_2interface VLAN 10 ip address 1.0.0.100 255.255.255.0
switchport mode access
switchport acces vlan 10ip policy route-map INTERNET
ip access-list standard LAN
permit 2.0.0.0 0.0.0.255
route-map internet permit 10
match ip address LAN
set ip next-hop 1.0.0.3
Thanks in advance for your help!!!!
Solved! Go to Solution.
10-04-2012 07:48 PM
Yes. it will work
10-04-2012 07:48 PM
Yes. it will work
10-04-2012 09:44 PM
hello,
it will work.
http://www.cisco.com/en/US/docs/ios/ipapp/configuration/guide/ipapp_hsrp.pdf
thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide