HSRP virtual IP address configured as a next-hop in a PBR

[student100]

HSRP virtual IP address configured as a next-hop in a policy (PBR)

Hello:

I'd like to know whether I could use an HSRP virtual IP address configured as a next-hop in a PBR.

For example (please see attached drawing):

Router 1

interface ethernet 0 
ip address 1.0.0.1 255.255.255.0 
standby 1 ip 1.0.0.3 standby 1 preempt 
standby 1 priority 110 

Router 2
interface ethernet 0 
ip address 1.0.0.2 255.0.0.0 
standby 1 ip 1.0.0.3 
standby 1 preempt 

Router 3 (L3 switch):

interface ethernet 0
description TO_ROUTER_1
switchport mode access
switchport acces vlan 10
interface ethernet 1
description TO_ROUTER_2
switchport mode access
switchport acces vlan 10
interface VLAN 10 ip address 1.0.0.100 255.255.255.0 



interface VLAN 20 ip address 2.0.0.1 255.255.255.0

ip policy route-map INTERNET
ip access-list standard LAN
permit 2.0.0.0 0.0.0.255

route-map internet permit 10
match ip address LAN
set ip next-hop 1.0.0.3

Thanks in advance for your help!!!!

[Raju Sekharan · Accepted solution]

Yes. it will work

[singhaam007]

hello,

it will work.

http://www.cisco.com/en/US/docs/ios/ipapp/configuration/guide/ipapp_hsrp.pdf

thanks