07-15-2013 09:03 PM - edited 03-04-2019 08:27 PM
Hi guys,
I have a pair of CSR1000V running in a vmware infrastructure. I have a slight issue with FHRPs, I tried both hsrp and vrrp and symptomps are the same. When preemption is enabled, the router preempt and becomes active, but the other one stays active, anyone has seen this issue?
Thanks
Sent from Cisco Technical Support iPad App
07-16-2013 06:36 AM
This might be a obvious question, but can each node "see" each other i.e. does a "show standby" show the HSRP neighbor and the relevent priorities?
07-16-2013 07:11 AM
Yes, before the preemption happens they see eachother, and right after they don't anymore in both router with either hrsp or vrrp.
I did not try glbp since it is not an option here, the routers are dmvpn hubs (dual cloud) and i need a prefered route.
Any ideas what I should check?
Thanks for your support!
Sent from Cisco Technical Support iPhone App
07-21-2013 09:11 PM
Anyone?
Sent from Cisco Technical Support iPad App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide