12-28-2021 12:01 AM
Hi
Please find the attached Diagram for Reference:
We have our own APNIC pool which we have advertised to ISP-1 and ISP-2 as shown in diagram.
On ISR routers we are Advertising 1.1.1.0/24 to ISP-1 and ISP-2 via EBGP and receiving Default route on both ISR routers.
Issue: Majority of our inbound traffic is preferred via ISP-2, even after trying AS path Prepend still the same issue.
Since we have advertised the entire subnet to ISPs even though the traffic leave via ISP-1 preferred path is ISP2.
on my Lab its a straight forward with AS-path prepend is working fine.. but since ISR routers are connected to Service providers, how do I influence my Inbound traffic.. (Tried AS path prepend and not working)
I would like to make ISP-1 as primary and ISP-2 as Secondary
Please need your Guidance/Suggestions
Thanks
12-28-2021 06:58 AM
Hi
Do you have the topology of this lab and the output CLI?
12-28-2021 08:38 AM - edited 12-28-2021 08:41 AM
Hello
Exact duplicate post with this - Just a different OP name?
12-28-2021 11:22 AM
Friend,
AS prepend with private AS, some ISP use remove private and hence all your AS private with prepend will remove.
can you try public AS, this make ISP not remove it "even if there is inter ISP".
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide