04-03-2014 01:25 AM - edited 03-04-2019 10:42 PM
Hi peoples, i'm hoping someone can assist as i really am at the end of my tether. Ive recently moved home and started using the cisco 877w for my adsl connection, previous on a cable modem. My 877w keeps disconnecting, as in no pages on my wired or wireless devices. I am running c870-advipservicesk9-mz.151-4.M3.bin, from what ive noticed the ATM light stays lit, so i assumed it was the dialer interface disconnecting, ive added in persistant dialing, but doesnt seem to have mate a hoot of different, could somene check out my config and my diagnostic outputs and possibly show me the way forward......maybe i need a different ios i dont know, the different ios versions confuse me.... See below
i can provide the 'show dsl interface' output at request.
04-03-2014 07:04 AM
Hi,
How often is your connection dropping?
Your config looks ok after a quick look.
The following, however, caught my eye:
It looks like you have a downstream issue (capacity 96%, FEC errors). I would log a call with your ISP service desk first of all.
04-03-2014 08:52 AM
Hi David
I had the same issue with my 887w, in the end it was not the cisco it was bad BT line.
Give your ISP a call and ask the to chenge SNR mirhaing manually, your speed wil be decreased but conection will be stable.
In my case this has solved an issue
Regards
Leo
08-03-2015 12:30 PM
This discussion has been reposted from Cisco User Groups to the WAN, Routing and Switching community.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide