cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1533
Views
0
Helpful
8
Replies

%INTR_MGR-3-BURST: HY_LS_SV_INTERRUPT[0x1] local RBus FCS2 error [1352]

Jian Yu
Level 1
Level 1

Hi,when i inserted a module with WS-X6548-GE-TX, the router 7609 displays some errors. iI am getting the following error logs

 

SLOT 1: Oct 16 01:05:34: %INTR_MGR-3-BURST:  HY_EI_EC_INT[0x80] EARL RBus packet error [2692]
SLOT 1: Oct 16 01:05:34: %INTR_MGR-3-BURST:  HY_EI_EC_INT[0x40] EARL RBus header error [3588]
SLOT 1: Oct 16 01:05:35: %INTR_MGR-3-BURST:  HY_LS_SV_INTERRUPT[0x2] local RBus FCS1 error [3528]
SLOT 3: Oct 16 01:05:35: %INTR_MGR-3-BURST:  HY_LS_SV_INTERRUPT[0x1] local RBus FCS2 error [2212]
SLOT 1: Oct 16 01:05:35: %INTR_MGR-3-BURST:  HY_LS_SV_INTERRUPT[0x1] local RBus FCS2 error [2744]
SLOT 3: Oct 16 01:05:35: %INTR_MGR-3-BURST:  HY_EI_EC_INT[0x40] EARL RBus header error [3324]
SLOT 3: Oct 16 01:05:35: %INTR_MGR-3-BURST:  HY_LS_SV_INTERRUPT[0x2] local RBus FCS1 error [3312]
SLOT 1: Oct 16 01:05:36: %INTR_MGR-3-BURST:  HY_EI_EC_INT[0x40] EARL RBus header error [3592]
SLOT 1: Oct 16 01:05:37: %INTR_MGR-3-BURST:  HY_LS_SV_INTERRUPT[0x2] local RBus FCS1 error [3532]

Then all interface is down, cannot  telnet it. 

The IOS version of the router is: c7600rsp72043-ipservicesk9-mz.122-33.SRC.bin

following is the output of show inventory

NAME: "CISCO7609-S", DESCR: "Cisco Systems Cisco 7600 9-slot Chassis System"
PID: CISCO7609-S       , VID: V01, SN: FOX1212G4GF

NAME: "WS-C6K-VTT-E 1", DESCR: "VTT-E FRU 1"
PID: WS-C6K-VTT-E      , VID:    , SN: SMT1144B241

NAME: "WS-C6K-VTT-E 2", DESCR: "VTT-E FRU 2"
PID: WS-C6K-VTT-E      , VID:    , SN: SMT1144B097

NAME: "WS-C6K-VTT-E 3", DESCR: "VTT-E FRU 3"
PID: WS-C6K-VTT-E      , VID:    , SN: SMT1144B094

NAME: "CLK-7600 1", DESCR: "OSR-7600 Clock FRU 1"
PID: CLK-7600          , VID:    , SN: NWG120401NQ

NAME: "CLK-7600 2", DESCR: "OSR-7600 Clock FRU 2"
PID: CLK-7600          , VID:    , SN: NWG120401NQ

NAME: "module 1", DESCR: "Cisco 7600 Series SPA Interface Processor-200 Rev. 2.303"
PID: 7600-SIP-200      , VID: V05, SN: JAE1218GT9D

NAME: "SPA subslot 1/0", DESCR: "4-port Fast Ethernet TX Shared Port Adapter"
PID: SPA-4X1FE-TX-V2   , VID: V01, SN: JAE1209A56Q

NAME: "SPA subslot 1/2", DESCR: "8-port Channelized T1/E1 to DS0 Shared Port Adapter"
PID: SPA-8XCHT1/E1     , VID: V04, SN: JAE1218GWXL

NAME: "SPA subslot 1/3", DESCR: "8-port Channelized T1/E1 to DS0 Shared Port Adapter"
PID: SPA-8XCHT1/E1     , VID: V04, SN: JAE1218GWWN

NAME: "module 3", DESCR: "Cisco 7600 Series SPA Interface Processor-200 Rev. 2.303"
PID: 7600-SIP-200      , VID: V05, SN: JAE1217FNRM

NAME: "SPA subslot 3/0", DESCR: "8-port Channelized T1/E1 to DS0 Shared Port Adapter"
PID: SPA-8XCHT1/E1     , VID: V04, SN: JAE11485CXH

NAME: "SPA subslot 3/1", DESCR: "8-port Channelized T1/E1 to DS0 Shared Port Adapter"
PID: SPA-8XCHT1/E1     , VID: V05, SN: SAL1551Z6YG

NAME: "SPA subslot 3/2", DESCR: "8-port Channelized T1/E1 to DS0 Shared Port Adapter"
PID: SPA-8XCHT1/E1     , VID: V03, SN: JAB103504NV

NAME: "module 5", DESCR: "RSP720-3CXL-GE 2 ports Route Switch Processor 720 Rev. 5.9"
PID: RSP720-3CXL-GE    , VID: V09, SN: JAE1215DWHB

NAME: "msfc sub-module of 5", DESCR: "7600-MSFC4 C7600 MSFC4 Daughterboard Rev. 1.1"
PID: 7600-MSFC4        , VID: 000, SN: JAE1215EEAD

NAME: "switching engine sub-module of 5", DESCR: "7600-PFC3CXL Policy Feature Card 3 Rev. 1.0"
PID: 7600-PFC3CXL      , VID: 000, SN: JAE1214DGBG

NAME: "module 6", DESCR: "RSP720-3CXL-GE 2 ports Route Switch Processor 720 Rev. 5.9"
PID: RSP720-3CXL-GE    , VID: V09, SN: JAE14030PH2

NAME: "msfc sub-module of 6", DESCR: "7600-MSFC4 C7600 MSFC4 Daughterboard Rev. 1.5"
PID: 7600-MSFC4        , VID: 000, SN: JAE14020FFY

NAME: "switching engine sub-module of 6", DESCR: "7600-PFC3CXL Policy Feature Card 3 Rev. 1.1"
PID: 7600-PFC3CXL      , VID: 000, SN: JAE14020IMG

NAME: "module 9", DESCR: "Cisco 7600 Series SPA Interface Processor-200 Rev. 2.303"
PID: 7600-SIP-200      , VID: V05, SN: JAE140311QP

NAME: "SPA subslot 9/0", DESCR: "8-port Fast Ethernet TX Shared Port Adapter"
PID: SPA-8X1FE-TX-V2   , VID: V02, SN: JAE15300AUJ

NAME: "SPA subslot 9/1", DESCR: "8-port Channelized T1/E1 to DS0 Shared Port Adapter"
PID: SPA-8XCHT1/E1     , VID: V04, SN: JAE1220HUWC

NAME: "SPA subslot 9/2", DESCR: "1-port Channelized OC3/STM1 to DS0 Shared Port Adapter"
PID: SPA-1XCHSTM1/OC3  , VID: V03, SN: SAL1648TCE7

NAME: "subslot 9/2 transceiver 0", DESCR: "OC3 IR-1/STM1 S-1.1"
PID: SFP-OC3-IR1         , VID: A   , SN: SPC16450E9N     

NAME: "FAN-MOD-9SHS 1", DESCR: "High Speed Fan Module for CISCO7609-S 1"
PID: FAN-MOD-9SHS      , VID: V01, SN: FOX1212G15N

NAME: "FAN-MOD-9SHS 2", DESCR: "High Speed Fan Module for CISCO7609-S 2"
PID: FAN-MOD-9SHS      , VID: V01, SN: FOX1212G15M

NAME: "PS 1 WS-CAC-3000W", DESCR: "AC power supply, 3000 watt 1"
PID: WS-CAC-3000W      , VID: V01, SN: AZS11490ECW

NAME: "PS 2 WS-CAC-3000W", DESCR: "AC power supply, 3000 watt 2"
PID: WS-CAC-3000W      , VID: V01, SN: AZS11490EC7

 

 

8 Replies 8

InayathUlla Sharieff
Cisco Employee
Cisco Employee

Looks to be hardware issue.

Have you tried replacing the module?

 

HTH

 

 

replace the WS-X6548-GE-TX module? I inserted it on last Wednesday,  the case is also occurred. Then I applied for a RMA. Yesterday,  I have already used the new one. but it still so.

 

Could yoiu please open a TAC case as there are few things which we would like to check?

I opened the case last week. TAC suggested that replace the module. In fact , it is not useful.

Now I used a new chassis, but  I don't know, When the module is inserted, what's happen.

I will open a case again to solve it.

Thank you.

Ghostmiki,

The above messages indicate to us that the packets are getting corruption the
Result-Bus(RBus) and there are multiple causes for this, which are all hardware level
issue:

-the module is not seated properly or its connectors have failed.

-the backplane on its slot has been damaged.

-the supervisor or damaged backplane on its slot.

HTH

Regards

Inayath

Inayath,

 

I find a doc said the RSP720-3CXL-GE supervisor cannot support this module.

Is this right?

 

http://www.cisco.com/c/en/us/products/collateral/routers/7600-series-routers/product_data_sheet0900aecd8057f3b6.html

 

  High-Density Ethernet cards (part numbers):
   WS-X6700
   WS-6500  → the same to  WS-X6500?
   WS-X6400
   WS-X6100
 
 

Thanks

Ghostmiki

No, This module is supported by this Supervisor.

 

HTH

Ok. I will try to replace the chassis.  Thanks for your help.

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco