cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
778
Views
0
Helpful
6
Replies

IOS 15 aaa Problem

Greeting I am configuring aaa privilege I found that more command is adding automatically. I can not remove this command and If I successfully remove it ; it remove main command also .

I configure the below command ;

privilege interface level 4 shutdown
privilege configure level 4 interface
privilege exec level 4 configure terminal
privilege exec level 4 show port-security
privilege exec level 4 clear port-security all
privilege exec level 4 clear port-security

but when do sh run ; the below highlighted bold command will appear ;

privilege interface level 4 shutdown
privilege configure level 4 interface
privilege exec level 4 configure terminal
privilege exec level 4 configure
privilege exec level 4 show port-security
privilege exec level 4 show
privilege exec level 4 clear port-security all
privilege exec level 4 clear port-security
privilege exec level 4 clear

this cause many problem in privilege Can any body help me ??!!! 

6 Replies 6

Philip D'Ath
VIP Alumni
VIP Alumni

What model Cisco device is this, and what software version are you running on it?

Dear Philip;

the switch is 2960 and IOS version is 15.2

Could you give me the specific model number from "show inventory" please.

kindly check the switch model Catalyst 2960-24TC-L Switch

15.2 is not available for that model.  Are you running 15.0.2-SE9?  If not, try moving to that release.

all IOS Version 15 have the same issue . I had been installed all IOS related to Version 15 but the problem still exist

Review Cisco Networking for a $25 gift card