03-29-2016 12:27 AM - edited 03-05-2019 03:40 AM
Greeting I am configuring aaa privilege I found that more command is adding automatically. I can not remove this command and If I successfully remove it ; it remove main command also .
I configure the below command ;
privilege interface level 4 shutdown
privilege configure level 4 interface
privilege exec level 4 configure terminal
privilege exec level 4 show port-security
privilege exec level 4 clear port-security all
privilege exec level 4 clear port-security
but when do sh run ; the below highlighted bold command will appear ;
privilege interface level 4 shutdown
privilege configure level 4 interface
privilege exec level 4 configure terminal
privilege exec level 4 configure
privilege exec level 4 show port-security
privilege exec level 4 show
privilege exec level 4 clear port-security all
privilege exec level 4 clear port-security
privilege exec level 4 clear
this cause many problem in privilege Can any body help me ??!!!
03-29-2016 06:47 PM
What model Cisco device is this, and what software version are you running on it?
03-29-2016 10:19 PM
Dear Philip;
the switch is 2960 and IOS version is 15.2
04-03-2016 02:24 PM
Could you give me the specific model number from "show inventory" please.
04-04-2016 01:33 AM
kindly check the switch model Catalyst 2960-24TC-L Switch
04-04-2016 12:14 PM
15.2 is not available for that model. Are you running 15.0.2-SE9? If not, try moving to that release.
04-04-2016 10:28 PM
all IOS Version 15 have the same issue . I had been installed all IOS related to Version 15 but the problem still exist
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide