Ios ssl Anyconnect vpn

[Ma'moun Mohammad shanableh]

I am trying to configure a remote access vpn on ISR 4331 router with ipbase and sec licenses.

The problem is that the webvpn command is not recognized.

Anyone have any idea or a tested configuration example.

Thx

[balaji.bandi]

Look at the matrix supported features. :

https://www.cisco.com/c/dam/en/us/products/collateral/routers/4000-series-integrated-services-routers-isr/enterprise-routing-portfolio-poster.pdf

[Ma'moun Mohammad shanableh]

I see that it is not supported...

How can i enable RA VPN on it??

[Georg Pauwen]

Hello,

AnyConnect IKEv2 remote access is supported I think.

Check the link below for configuration details:

https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect-IKEv2-Remote-Access.html

[balaji.bandi]

AS suggested look at the Flex VPN and let us know any issues

[Karsten Iwen]

As already mentioned, AnyConnect connections with IKEv2 are supported. I went through the configuration some time ago and the way it is configured is completely different from the config on the ASA. There are config guides available, I think with a search for "FlexVPN Server" you should find the relevant guides.

For my implementation, after being ready with that, I repented to not have just placed another small ASA parallel to the router which had been much easier. Next time I will do it that way.

[Deepak Kumar]

Hi,

You may found a basic configuration example here: https://www.cisco.com/c/en/us/support/docs/security/flexvpn/115941-flexvpn-ikev2-config-00.html

This is flexVPN support on mentioned platform.