Hi, can someone explain to me what committed memory means in the command below, Is that committed memory being used by the IOS process or committed total by the platform's linux kernel. I researched but could not get a clear answer.
#sh platform software status control-processor br Load Average Slot Status 1-Min 5-Min 15-Min 1-RP0 Healthy 0.75 0.69 0.68 2-RP0 Healthy 0.15 0.21 0.22
Memory (kB) Slot Status Total Used (Pct) Free (Pct) Committed (Pct) 1-RP0 Healthy 3976872 2770888 (70%) 1205984 (30%) 2844336 (72%) 2-RP0 Healthy 3976872 1866164 (47%) 2110708 (53%) 2726820 (69%)
Listen: https://smarturl.it/CCRS9E25 Follow us: twitter.com/ciscochampions
With applications and users everywhere, the networks are now, more than ever, being tasked with delivering consistent protection while providing an exceptional user exper...
Listen: https://smarturl.it/CCRS9E24 Follow us: https://twitter.com/CiscoChampion
Cisco Radio Aware Routing addresses several of the challenges faced when merging IP routing and radio communications in mobile networks, especially those exhibiti...
Listen: https://smarturl.it/CCRS9E23 Follow us: https://twitter.com/CiscoChampion The Wi-Fi 6E Catalyst 9136 access point takes advantage of the 6-GHz band to produce a network that is more reliable and secure, with higher throughput, more ...
When moving from OSPFv2 to OSPFv3, there are many changes in the format of the LSAs Type, but the most known changes are: IP prefix informations are no longer carried in Type-1 LSA and Type-2 LSA, new LSAs Type 8 and 9 are added to carry these prefixes.