05-22-2013 04:55 AM - edited 03-04-2019 07:58 PM
Hello Everyone,
When do we use the following ospf commands?
I've been working within GNS and it seems that ospf automatically recognizes, based on the media type, what the network type should be..
So, I don't understand why these commands exist?
1) Broadcast (Cisco Extension)
2) non-Broadcast (RFC-compliant mode)
3) Point-to-multipoint (RFC-compliant mode)
4) point-to-multipoint non-broadcast (Cisco extension)
5) POint-to-point (Cisco extension)
Do they exist more for a Frame Relay purpose
Solved! Go to Solution.
05-22-2013 05:06 AM
Hi,
they exist to change the default network type that the device configured on the interface, for example:
-loopbacks are treated as stubs so they are advertised with a /32 by default and if you want to override this then change the network type
-you have 2 routers connected via an ethernet link so change the network type to be point-to-point as here you don't need any DR/BDR
-you have a frame-relay config with devices having different but compatible network types but the adjacency doesn't come up because of different hello/dead timers then either change the network type to modify these timers or change the hello/dead to be equal.
I'm sure that you'll find other usages for these network types.
Regards
Alain
Don't forget to rate helpful posts.
05-22-2013 05:06 AM
Hi,
they exist to change the default network type that the device configured on the interface, for example:
-loopbacks are treated as stubs so they are advertised with a /32 by default and if you want to override this then change the network type
-you have 2 routers connected via an ethernet link so change the network type to be point-to-point as here you don't need any DR/BDR
-you have a frame-relay config with devices having different but compatible network types but the adjacency doesn't come up because of different hello/dead timers then either change the network type to modify these timers or change the hello/dead to be equal.
I'm sure that you'll find other usages for these network types.
Regards
Alain
Don't forget to rate helpful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide