You're going to need a different IOS version. The Universal IOS is licensed based off of what features you want. You'll need , at minimum, the data version and not the base version. If you do a "sh ver" on your router, you'll notice a table of features. If they say none by the item in the "Technology" column, then your IOS doesn't support those features. So, in the data row, you should have "datak9 Permanent datak9". If you have none in all 3, then you need an upgrade.
Cisco Digital Network Architecture Center Modules(Design Module)Part.2In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and availability to con...
Connectivity Design considerations and recommendation
1.Management Access connectivity
If there is a dedicated OOB management path, consider connecting to CIMC and MGMT port.
If OOB path is not available, Connect the dedicated Management port to LAN Swi...
Cisco Digital Network Architecture Center Modules In this article, we are going to talk about Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and scalability to configure multiple fabric sites a...
This document provides an overview of DPDK and steps to configure and troubleshoot DPDK for OVS in NFVIS.
DPDK stands for Data Plane Development Kit, is a set of libraries that improves data plane performance.DPDK description