IP Sla tracking and vs or

[cisco8887]

All,

And to me means both or more of the object needs to be down and or means either.

I have the following :

Track 1 - RTR (Rechability)

Track 2- RTR (Rechability)

Track 3 - RTR (Rechability)

Now I have track group as follow

Track 100 Or

track1

Track2

Track 200 and

track 100 

track 3

WHat is strange is track 100 is up no issues, however track 3 does go down from time to time. This results in track 200 going ip and down where it is and statement.

any thoughts?

[balaji.bandi]

AND – it requires that all the objects defined in the track list to be up.
OR – it requires that at least one object to be up.

what is your goal ?

below case is and (so one of them fail it will action)

Track 200 and

track 100

track 3

can you post show output of each track information.

here explained better way :

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp/configuration/xe-16-10/iap-xe-16-10-book/iap-eot.html

[cisco8887]

Would opposite not be true for doen

Down and needs all to be down and down or is if anyone them is doen?

[balaji.bandi]

Not sure how these are configured, we need more information and config to suggest best here

[MHM Cisco World]

follow

[notmove]

It would assist us higher decide what's the problem if we ought to see configuration of the applicable interfaces from both routers. I have seen issues with the symptoms described the service of jrs tracking bc.