cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
666
Views
0
Helpful
1
Replies

IPSEC/ISAKMP VPN on Cisco 3900

esamaniego
Level 1
Level 1

I just replaced 2800 router this did not have a VPN hardware accelerator with a 3925 that does have a VPN accelerator built in. I copied the same VPN (ISPEC/ISAKMP) config from the 2800 to the 3925 and it works.

Here is my question, is there something special I have to do to enable the hardware acceleration or is it automatically used for every VPN session?

1 Accepted Solution

Accepted Solutions

Kasiraman S
Level 1
Level 1

Hi Erik,

It does not require any command to enable hardware acceleration and RTR procees the VPN traffic in hardware by default.

Thanks,

Kasi

View solution in original post

1 Reply 1

Kasiraman S
Level 1
Level 1

Hi Erik,

It does not require any command to enable hardware acceleration and RTR procees the VPN traffic in hardware by default.

Thanks,

Kasi

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco