cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
546
Views
0
Helpful
1
Replies
esamaniego
Beginner

IPSEC/ISAKMP VPN on Cisco 3900

I just replaced 2800 router this did not have a VPN hardware accelerator with a 3925 that does have a VPN accelerator built in. I copied the same VPN (ISPEC/ISAKMP) config from the 2800 to the 3925 and it works.

Here is my question, is there something special I have to do to enable the hardware acceleration or is it automatically used for every VPN session?

1 ACCEPTED SOLUTION

Accepted Solutions
Kasiraman S
Beginner

Hi Erik,

It does not require any command to enable hardware acceleration and RTR procees the VPN traffic in hardware by default.

Thanks,

Kasi

View solution in original post

1 REPLY 1
Kasiraman S
Beginner

Hi Erik,

It does not require any command to enable hardware acceleration and RTR procees the VPN traffic in hardware by default.

Thanks,

Kasi

View solution in original post