10-09-2019 02:48 PM
Hi All,
I have just one simple question. We are planning to buy Cisco 550X and would like to know if it is capable of EIGRP routing? I checked with its datasheet and it did not mention about EIGRP unlike other cisco l2/l3 switches. Many thanks in advance...
Solved! Go to Solution.
10-09-2019 02:55 PM
Hello,
unfortunately it does not support EIGRP. It only supports RIPv2. Check Table 1 in the datasheet linked below...
10-09-2019 02:56 PM
As per the document it does not support any other IGP, except RIP .
10-09-2019 10:49 PM
Hi,
It will not support EIGRP. You can work with RIP2
10-09-2019 02:55 PM
Hello,
unfortunately it does not support EIGRP. It only supports RIPv2. Check Table 1 in the datasheet linked below...
10-09-2019 02:56 PM
As per the document it does not support any other IGP, except RIP .
10-09-2019 10:49 PM
Hi,
It will not support EIGRP. You can work with RIP2
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: