Thanks for the quick reply. Full config below, passwords removed!
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname xx
!
boot-start-marker
boot system flash c870-advsecurityk9-mz.124-4.XC4.bin
boot-end-marker
!
!
no aaa new-model
!
resource policy
!
ip cef
!
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 0/50
encapsulation aal5snap
protocol ppp dialer
dialer pool-member 5
!
dsl operating-mode auto
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
ip address 10.0.0.2 255.255.255.0
ip nat inside
ip virtual-reassembly
no ip route-cache cef
no ip route-cache
ip tcp adjust-mss 1300
no ip mroute-cache
!
interface Dialer0
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
no ip route-cache cef
no ip route-cache
ip tcp adjust-mss 1300
no ip mroute-cache
dialer pool 5
dialer remote-name Etisalat
dialer-group 10
ppp chap hostname test
ppp chap password 7 test
ppp pap sent-username test password 7 test
!
ip route 0.0.0.0 0.0.0.0 Dialer0
!
no ip http server
no ip http secure-server
ip nat inside source static 10.0.0.1 interface Dialer0
!
access-list 110 permit ip 10.0.0.0 0.0.0.255 any
dialer-list 10 protocol ip permit
!
!
control-plane
!
line con 0
no modem enable
transport output all
line aux 0
transport output all
line vty 0 4
privilege level 15
login local
transport input ssh
transport output all
!
scheduler max-task-time 5000
!
webvpn context Default_context
ssl authenticate verify all
!
no inservice
!
end
Not that i want to in this case and out of curiosity, how would you apply the ACL to interface?
Thanks,
Chris
