08-05-2014 03:48 AM - edited 03-04-2019 11:29 PM
I am trying to Configure IP Accounting on my ISR4451-X/K9 WAN Router, but the command IP accounting isn't working. May I ask for assistance with this issue
08-05-2014 09:52 AM
Hi,
Share me show version of your router , when you say not working , you are not able to configure it ?? or after configuring you cant see proper output ??
HTH
Sandy
08-06-2014 02:03 AM
Please see Show version output below:
TAWTAK4451-R#sh version
Cisco IOS XE Software, Version 03.11.01.S - Standard Support Release
Cisco IOS Software, ISR4400 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(1)S1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Sat 01-Mar-14 12:12 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2014 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
TAWTAK4451-R uptime is 3 weeks, 4 days, 19 hours, 58 minutes
Uptime for this control processor is 3 weeks, 4 days, 19 hours, 59 minutes
System returned to ROM by reload
System restarted at 15:05:41 UTC Thu Jul 10 2014
System image file is "bootflash:/isr4400-universalk9.03.11.01.S.154-1.S1-std.SPA.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Technology Package License Information:
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
appx None None None
uc None None None
security None None None
ipbase ipbasek9 Permanent ipbasek9
cisco ISR4451-X/K9 (2RU) processor with 1385839K/6147K bytes of memory.
Processor board ID FGL1813129S
10 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
7393215K bytes of flash memory at bootflash:.
Configuration register is 0x2102
I am not able to configure IP accounting. When I go the interface I cannot put the command IP accounting. Please not I have configured aaa new-model.
Yasir
08-06-2014 03:59 AM
Hello,
I believe you are trying with "ip accounting" instead of "accounting".
-if)# accouting
Regards
Rahul
08-06-2014 03:40 PM
not working as well
08-22-2014 10:40 AM
Hello Yasir,
IP accounting is not supported in any IOS-XE router. The 4451 runs IOS-XE so the same rules from the ASR1000 apply here since this was the first platform with IOS-XE. ASR1000 doesn't support IP accounting. There are several bugs that document this:
CSCtx97298
Remove unsupported CLI "show ip accounting"
Externally found moderate (Sev3) bug: R-Resolved
CSCth37116
ASR1000 Disable IP accounting from the CLI
Externally found moderate (Sev3) bug: R-Resolved
There are no specific documents for the 4451 because this device is very new but again, the same thing applies here. This is not supported here as well in the ASR1000s. The replacement for this feature is Flexible Netflow.
NetFlow is a Cisco IOS technology that provides statistics on packets flowing through the router. NetFlow is the standard for acquiring IP operational data from IP networks. NetFlow provides data to enable network and security monitoring, network planning, traffic analysis, and IP accounting.
A comprehensive IP accounting feature that can be used to replace many accounting features, such as IP accounting, Border Gateway Protocol (BGP) Policy Accounting, and persistent caches.
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/fnetflow/configuration/xe-3s/fnf-xe-3s-book/fnf-fnetflow.html
10-29-2014 05:50 AM
Thank you guys.
Most likely we will use netflow
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide