ISR4431 - HSECK9

[Andrey.A]

Hi all,

Is it possible to activate hseck9 license for evaluation period of time, without buying and installing it?

I can see that from conf t, there is a command:

ISR_4431(config)#license feature ?
hseck9 Enable hseck9 license

ISR_4431(config)#exit

 But I'm not sure what does this command do and do you need to reload router or anything? Anyone had some experience with this?

Regards,

Andrey

[Georg Pauwen]

Hello,

what are your options after:

ISR_4431(config)#license ?

Check if there is a command 'license right-to-use'...

[Andrey.A]

Hi Georg,

Please see below:

ISR_4431(config)#license ?
accept Accept all further License Agreements
agent Configure LIC_AGENT
boot license boot config commands
call-home license call-home config commands
feature License features
smart Smart licensing
udi license udi

ISR_4431(config)#license fe
ISR_4431(config)#license feature ?
hseck9 Enable hseck9 license

ISR_4431(config)#license feature hse
ISR_4431(config)#license feature hseck9 ?
<cr> <cr>

ISR_4431#license ri
ISR_4431#license right-to-use ?
move Move to permanent mode

ISR_4431#license right-to-use m
ISR_4431#license right-to-use move ?
WORD license name

ISR_4431#license right-to-use move hse
ISR_4431#license right-to-use move hseck9 ?
<cr> <cr>

ISR_4431#

[Georg Pauwen]

Hello,

what if you hit ENTER after:

ISR_4431#license right-to-use move hseck9 

then save and reload the device ?

[balaji.bandi]

Look at this thread :

https://community.cisco.com/t5/switching/help-with-isr4331-evaluation-license/td-p/3178071

[Andrey.A]

Hi all,

As this router is in production I can not do some testing on it. After searching through documentation I found this:

The HSECK9 feature does not have an evaluation license that converts to an RTU license after 60 days; a feature license must be obtained.

We will buy the license and activate it after that. Thank you all on help!

Regards,

Andrey

[balaji.bandi]

Sure that is a good approach to get License from Cisco and Activate it.