01-30-2019 06:24 AM - edited 03-05-2019 11:13 AM
I have a question relating to ISR licensing on a few ISR4331s. I'm a bit new to the licensing on these, for forgive me if it's something obvious.
We purchased the router with a Securityk9 license froim our vendor. While the show license command shows me that I have a permanent security license, the show version command does not. Is this normal? Maybe a bug? I'm seeing this on 3 different routers.
I also had my vendor provide me with PAK keys for the Securityk9 package, which I activated and installed on two of the devices. I then rebooted the devices but the licensing outputs didn't change.
Below I've included both commands.
ISR4331#show version
.....
Suite License Information for Module:'esg'
--------------------------------------------------------------------------------
Suite Suite Current Type Suite Next reboot
--------------------------------------------------------------------------------
FoundationSuiteK9 FoundationSuiteK9 EvalRightToUse FoundationSuiteK9
securityk9
appxk9
AdvUCSuiteK9 None None None
uck9
cme-srst
cube
Technology Package License Information:
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
appxk9 None None None
uck9 None None None
securityk9 None None securityk9
ipbase ipbasek9 Permanent ipbasek9
cisco ISR4331/K9 (1RU) processor with 1648789K/6147K bytes of memory.
......
ISR4331#show license
Index 1 Feature: appxk9
Period left: 4 weeks 6 days
Period Used: 3 weeks 4 days
License Type: EvalRightToUse
License State: Active, In Use
License Suite: FoundationSuiteK9
License Count: Non-Counted
License Priority: Low
Index 2 Feature: uck9
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 3 Feature: securityk9
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Suite: FoundationSuiteK9
License Count: Non-Counted
License Priority: Medium
Index 4 Feature: ipbasek9
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Index 5 Feature: FoundationSuiteK9
Period left: 4 weeks 6 days
Period Used: 3 weeks 4 days
License Type: EvalRightToUse
License State: Active, In Use
License Count: Non-Counted
License Priority: Low
Index 6 Feature: AdvUCSuiteK9
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 7 Feature: cme-srst
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: 0/0 (In-use/Violation)
License Priority: None
Index 8 Feature: hseck9
Index 9 Feature: throughput
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 10 Feature: internal_service
01-30-2019 07:34 AM
Once you reboot, you will be good to go. Look here...
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
appxk9 None None None
uck9 None None None
securityk9 None None securityk9
ipbase ipbasek9 Permanent ipbasek9
And here...
Index 3 Feature: securityk9
Period left: Life time
License Type: Permanent
License State: Active, In Use
01-30-2019 08:47 AM
@blwilkins1 I thought so as well, unfortunately, the router has been rebooted and the licensing output did not change.
01-25-2021 07:29 PM
Did you do a "wr mem" before rebooting?
05-12-2021 10:40 AM
I have the same issue, I did do a wr mem before rebooting, ive rebooted a couple times now without change in sh ver licenses showing, it still says it will show on next reboot there.
Do you know why this is happening?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide