cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1801
Views
0
Helpful
3
Replies

L2TPv3 performance

Marco Fiocchi
Level 1
Level 1

Hello,

I would to realize an point to point connection in L2TPv3 with a bandwidth passthrough of 1 Gb. Which routers/switches I can use?

Thanks in advance

Regards

Marco

3 Replies 3

Ciao Marco,

i hope this file will help you

Alessio

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Marco,

I would say ASR 1000 as a minimum with appropriate feature set,

C6500 with sup720 is more expensive for sure

Hope to help

Giuseppe

Joseph W. Doherty
Hall of Fame
Hall of Fame

Disclaimer


The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

Going EoS 9/30/12, but 7200 with NPE-G2 or 7201 can usually handle 1 Gbps.

Review Cisco Networking products for a $25 gift card