License installation on cisco c1111-4P

[JRGC]

Hi there,
I'm trying to install a security license on my cisco 1111P,  I have a .lic file in the flash but when I try to install the router is not recognize the commands, "just accept license smart register idtoken"

Cisco IOS XE Software, Version 16.09.02

The lic file was send me from cisco

Somebody have a suggestion for install it?

Thank you in advance 

[Nithin Eluvathingal]

Hope you are trying to register your smart licensing. Smart license require Smart account( account should be with the client domain name) and the license will be deposited in Smart account. you need to generate a token from Smart account and use the same on router. 

go through the link to learn more.

https://www.cisco.com/c/en/us/td/docs/routers/access/1100/software/configuration/xe-16-6/cisco_1100_series_swcfg_xe_16_6_x/cisco_1100_series_swcfg_xe_16_6_x_chapter_010011.html

How to Activate Cisco Smart Licensing Client

• Enable Smart Licensing
• Smart License Disable
• Device Registration

Enable Smart Licensing

Procedure

  Command or Action Purpose

Step 1	enable Example: Device> enable	Enables privileged EXEC mode. Enter your password if prompted.
Step 2	configure terminal Example: Device# configure terminal	Enters global configuration mode.
Step 3	license smart enable Example: Device# license smart enable	Activates Smart Licensing on the device. Note  When you enable Smart Licensing, the Cisco Software License (CSL) and all licensing calls pass through the Smart Agent. For the ‘no’ case, if Smart Licensing is already registered, the Smart Agent performs the ”license smart deregister” operation that deactivates Smart Licensing.
Step 4	exit Example: Device# exit	Exits the global configuration mode.
Step 5	write memory Example: Device# write memory	Saves the running configuration to NVRAM.
Step 6	show license all Example: Device# show license all	(Optional) Displays summary information about all licenses.

Smart License Disable

Procedure

  Command or Action Purpose

Step 1	enable Example: Device> enable	Enables privileged EXEC mode. Enter your password if prompted.
Step 2	configure terminal Example: Device# configure terminal	Enters global configuration mode.
Step 3	no license smart enable Example: Device(config)# no license smart enable	Deactivates Smart Licensing on the device. Note  When you enable Smart Licensing, the Cisco Software License (CSL) and all licensing calls pass through the Smart Agent. For the ‘no’ case, if Smart Licensing is already registered, the Smart Agent performs the ”license smart deregister” operation that deactivates Smart Licensing. Reload the device to activate the CSL on the device.
Step 4	exit Example: Device(config)# exit	Exits the global configuration mode.
Step 5	write memory Example: Device# write memory	Saves the running configuration to NVRAM.
Step 6	reload Example: Device# reload	(Optional) Restarts the device to enable the new feature set. Note  Reload the device if you have not reloaded the device after configuring the Cisco One Suites.
Step 7	show license all Example: Device# show license all	(Optional) Displays summary information about all licenses.

Device Registration

Procedure

  Command or Action Purpose

Step 1	enable Example: Device> enable	Enables privileged EXEC mode. Enter your password if prompted.
Step 2	license smart register idtoken idtoken [force] Example: Device# license smart register idtoken 123	Registers the device with the back-end server. Token id can be obtained from your virtual a/c in the Smart Licensing server. force : To forcefully register your device irrespective of either the device is registered or not. Note  The device supplies the token ID to the Cisco server, which sends back a “Device Certificate” that is valid for 365 days.
Step 3	license smart deregister Example: Device# license smart deregister	Deregisters the device from the backend server.
Step 4	license smart renew [ID | auth] Example: Device# license smart renew ID	(Optional) Manually renews the ID certification or authorization.

[JRGC]

Hi, 

Thank you for your support! The issue was resolved.

Kind regards.

[sSiDs]

Sorry for late post.

We are going to buy c1111-8p with CON-3SNT-C11118P smarnet

does we neet to purchase any additional license for sec-k9 ?

and what it default lic ? ipbase?

[krisno adhi]

Hello @Nithin Eluvathingal to activate the license using smart license means the device must be reacheable to the internet or cisco web?

[Nithin Eluvathingal]

It depends on the setup, it can be direct which you Connect your device to CSSM(cloud) or you can have SSM(onprem) in which device connect to your on prem server. SSM need to  connect with CSSM for license syncing or on an Air gap network you need to sync it manually uploading files.

https://www.cisco.com/c/en_my/products/software/smart-accounts/software-licensing.html#~stickynav=4

https://www.cisco.com/c/en_my/products/software/smart-accounts/software-licensing.html?socialshare=video-t2

[sSiDs]

Sorry for late post.

We are going to buy c1111-8p with CON-3SNT-C11118P smarnet

does we neet to purchase any additional license for sec-k9 ?

and what it default lic ? ipbase?